✔︎ Possible to use two cameras
✔︎ 1280 x 720 resolution
✔︎ Up to 100 meter wireless range
A robust IP69K weatherproof wireless camera system for your trailer.
✔︎ Register your TrailerCam HD purchase and get a 3 year warranty
TrailerCam HD is a great camera system that allows you to easily monitor your animal in transport while you are driving. TrailerCam HD has night vision and gives you high-resolution images even if you are driving when it is dark. The wide-angle function on the monitor allows you to easily see the entire trailer and if needed, you can purchase an extra camera to see behind the trailer when reversing.
TrailerCam HD comes with a 4 meter 12 V Cig-adapter power cable for the 5” monitor. The IP69K-rated camera connects directly to the power source in the vehicle (usually the lighting source). You can use two cameras with one monitor, to shift the view between the cameras you simply press the channel button on the monitor. In addition, the camera is compatible with our PowerBanks, making it possible to use them wirelessly and place them wherever you want. The camera can easily be mounted with a strong magnet that can be purchased as an accessory (article no. 7029).
Due to its IP69K-rating, the camera is weather as well as water resistant and has a very robust construction. The system only takes a couple of minutes to install as the camera and monitor will automatically pair when connected to a power source. The system has a transmission range of up to 100 meters and night vision up to 10 meters.
Included in the package:
1 x Monitor
1 x Camera
1 x Monitor holder
1 x Direct power cable micro USB
1 x Cig adapter micro USB
1 x Camera installation kit
|Operating frequency:||2400 - 2483.5 MHz||Operating frequency:||2400 - 2483.5 MHz|
|Sensor:||Color CMOS||Screen type:||5” IPS digital panel|
|Resolution:||720p||Resolution:||1280 x 720|
|Maximum output power:||22 dBm||Transmission distance:||Up to 100 m|
|Max range line-of-sight:||Up to 100 m||Latency:||100 ms|
|Operation temperature:||– 20°C to + 70°C||Frame rate:||30 f/s|
|IP classification:||IP69K||Operation temperature:||- 20°C to + 70°C|
|Minimum illumination:||0.1 Lux||Brightness:||500 cd/m2|
|Night vision range:||Up to 10 m||Power supply:||9V - 30 VDC|
|Angle of view:||110°||Power consumption:||3 W|
|Power supply:||12 V - 32 VDC||Size:||13.6 cm x 8 cm x 1.1 cm|
|Power consumption:||2 W||Weight:||110 g|
|Size:||10 cm x 8 cm x 9 cm|
Add an extra camera to your trailer
You can connect two cameras to one monitor. We recommended pairing the camera with the monitor before mounting it. To add an extra camera, you will need to connect the camera to a power source. On the monitor, press the CH button and go to the channel where you want to pair the camera. Press and hold the M/PAIR button until it starts counting down. Within the 60 seconds countdown, press and hold the button on the back of the camera.