FarmCam Flex 5MP starter kit - specification table
Camera |
|
||
---|---|---|---|
Article number: | 1121 | ||
IP classification: | IP66 | Recording fram rate: | Up to 30 fps |
Video resolution: | 2560 x 1920p (5MP) | Local storage: | Max 256GB |
Night vision: | Up to 30 meters | Micro SD card: | 64GB (included) |
Angle of view: | 80° horizontally, 42° vertically | Power Source: | IEEE 802.3af, 48V Active |
Audio: | Built-in microphone | Smart alarm: | Person, Vehicle & motion detection |
Size: | Φ 186 x 67 mm | Image Sensor: | CMOS |
Weight: | 415g | Operating temperature: | -10°C to +55°C |
Flex Hub |
Bridge 300 |
||
---|---|---|---|
Article number: | 1122 | Article number: | 1123 |
Ports: | 1 x 100 Mbps for WAN 4 x 100 Mbps for LAN |
Physical Ports: | 1 x 10/100 Mbps WAN RJ45 (Service only) 1 x 10/100 Mbps LAN RJ45 (POE) 1 x Pair button 1 x Receiver/Sender Switch |
Port power voltage: | 48V | Antenna: | Built-in 2x14dBi |
Max. port power: | 30 W | IP classification: | IP65 |
LED indicator: | 5 green link/active LEDs | Wireless standard: | IEEE802.11b/g/n |
IP classification: | IP44 | Transmission Rate: | 40Mhz: 300 Mbps |
Operating temperature: | -20°C to 55°C | Working temperature: | -40°C to 55°C |
Storage temperature: | -40°C to 85°C | Storage temperature: | -50°C to 75°C |
Power Supply: | 100-240V, 50/60 Hz, Max 6.5 A | Power: | 802.3.af/at (POE) 48V POE Power adapter <8W consumption |
Power consumption idle: | 5.5 W | Size: | 262 x 80 x 53 mm |
Size: | 288.5 × 70 × 188 mm | Weight: | 0,32 kg |
Weight: | 1,1 kg |